DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 42)

DJI Mini 4 Pro User Manual
42
© 2023 DJI All Rights Reserved.
b. Settings
Tap the waypoint number for settings, the waypoint parameters are described as follows:
• When pinning a waypoint, it is recommended to fly to the location for a more accurate
and smoother imaging result.
• The aircraft horizontal GNSS position, altitude from the takeoff point, heading, gimbal
tilt, and camera zoom ratio at this waypoint will be recorded if the waypoint is pinned
during flight via the remote controller or the operation panel.
• Connect the remote controller to the internet and download the map before using
the map to pin a waypoint. When the waypoint is pinned via the map, only the aircraft
horizontal GNSS position can be recorded, and the default altitude of the waypoint is
set to 50 m from the takeoff point.
• The flight route will curve between waypoints, so the aircraft altitude between
waypoints may become lower than the altitudes of the waypoints during the flight.
Make sure to avoid any obstacles below when setting a waypoint.