DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 64)

DJI Mini 4 Pro User Manual
64
© 2023 DJI All Rights Reserved.
Using the Battery
Checking the Battery Level
Press the power button once to check the current battery level.
The battery level LEDs display the power level of the battery during charging and
discharging. The statuses of the LEDs are defined below:
LED is on
LED is flashing LED is off
LED1 LED2 LED3 LED4 Battery Level
88%-100%
76%-87%
63%-75%
51%-62%
38%-50%
26%-37%
13%-25%
0%-12%
Powering On/Off
Press the power button once and then press and hold for two seconds to power the aircraft
on or off. The battery level LEDs display the battery level when the aircraft is powered on. The
battery level LEDs turn off when the aircraft is powered off.
If LEDs 3 and 4 blink simultaneously, this indicates the battery is malfunctioning. Remove the
battery from the aircraft, insert the battery again and make sure that it is securely mounted.
Low-Temperature Notice
1. Battery capacity is significantly reduced when flying at low temperatures from -10° to 5° C (14°
to 41° F). Make sure to fully charge the battery before takeoff. It is recommended to power
on the aircraft for a while to warm up the battery. Take off after DJI Fly prompts that the
battery is fully warmed up.
2. Batteries cannot be used in extremely low-temperature environments of lower than -10° C
(14° F).
LED1
LED2
LED3
LED4
Battery Level LEDs
Power Button