Basic flight, Auto takeoff/landing, Starting/stopping the motors – DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller User Manual
Page 23
DJI Mini 4 Pro
User Manual
©
2023 DJI All Rights Reserved.
23
9. Only use genuine DJI parts or DJI authorized parts. Unauthorized parts may cause system
malfunctions and compromise flight safety.
10. Make sure the Obstacle Avoidance Action is set in DJI Fly, and the max flight altitude,
max flight distance and RTH altitude are all set properly according to the local laws and
regulations.
Basic Flight
Auto Takeoff/Landing
Auto Takeoff
Use the Auto Takeoff function:
1. Launch DJI Fly and enter the camera view.
2. Complete all steps in the pre-flight checklist.
3. Tap . If conditions are safe for takeoff, press and hold the button to confirm.
4. The aircraft will take off and hover approximately 1.2 m (3.9 ft) above the ground.
Auto Landing
Use the Auto Landing function:
1. Tap . If conditions are safe to land, press and hold the button to confirm.
2. Auto landing can be canceled by tapping .
3. If the Downward Vision System is working normally, Landing Protection will be enabled.
4. Motors will stop automatically after landing.
• Choose the proper place for landing.
Starting/Stopping the Motors
Starting the Motors
Perform the Combination Stick Command (CSC) as shown below to start the motors. Once the
motors have started spinning, release both sticks simultaneously.
OR