DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 85)

DJI Mini 4 Pro User Manual
© 2023 DJI All Rights Reserved.
85
DJI RC-N2
The DJI RC-N2 remote controller features O4 video transmission when used with DJI Mini 4 Pro,
the remote controller works at 2.4 GHz, 5.8 GHz and 5.1 GHz frequency bands. The remote
controller is also capable of selecting the best transmission channel automatically and can
transmit 1080p 60fps HD live view from the aircraft to DJI Fly on a mobile device (depending on
mobile device performance) at a maximum transmission range of 20 km (12.4 mi) (compliant
with FCC standards, and measured in a wide open area without interference). Users can control
the aircraft and change the settings easily within this range. The retractable mobile device
holder can be used to place mobile devices stably, and the control sticks are removable and
easy to store.
The built-in battery has a capacity of 5200 mAh and power of 18.72 Wh that supports a
maximum run time of six hours (when not charging the mobile device).
• The 5.1 GHz band can be used only in countries and regions where it is permitted by
local laws and regulations.
Operation
Powering On/Off
Press the power button once to check the current battery level.
Press once, then press and hold for two seconds to power the remote controller on or off.
Charging the Battery
Connect the charger to the USB-C port on the remote controller.
Controlling the Gimbal and Camera
1. Shutter/Record Button: Press once to take a photo or to start or stop recording.
2. Photo/Video Toggle: Press once to switch between photo and video mode.