DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 41)

DJI Mini 4 Pro User Manual
© 2023 DJI All Rights Reserved.
41
2. Plan a Waypoint Flight
Tap on the operation panel to set the parameters for the flight route such as Global
Speed, the behavior of End of Flight, On Signal Lost, and Start Point. The settings apply to all
waypoints.
Global Speed
The default flight speed of the entire flight route. Drag the speed bar to
set the global speed.
End of Flight
The behavior of the aircraft after the flight task ends. It can be set to
Hover, RTH, Land or Back to Start.
On Signal Lost
The behavior of the aircraft when the remote controller signal is lost
during flight. It can be set to RTH, Hover, Land or Continue.
Start Point
After selecting the start waypoint, the flight route will be started from
this waypoint to the subsequent waypoints.
• When using Waypoint Flight in the EU, the behavior of the aircraft when the remote
controller signal is lost cannot be set to Continue.
3. Waypoint Settings
a. Pin Waypoint
Waypoints can be pinned via the map before takeoff.
Waypoints can be pinned via the following methods after takeoff, GNSS is required.
• Using the Remote Controller: Press once on the Fn button (RC-N2) or the C1 button (DJI
RC 2) to pin a waypoint.
• Using the Operation Panel: Tap on the operation panel to pin a waypoint.
• Using the Map: Enter the map view and tap on the map to pin a waypoint.
Press and hold on a waypoint to move its position on the map.