Using quickshots, Exiting quickshots – DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller User Manual
Page 36
DJI Mini 4 Pro
User Manual
36
©
2023 DJI All Rights Reserved.
Using QuickShots
1. Launch the aircraft and make it hover at least 2 m (6.6 ft) above ground.
2m
2. In DJI Fly, tap the shooting mode icon to select QuickShots and follow the prompts. Make
sure you understand how to use the shooting mode and there are no obstacles in the
surrounding area.
3. Choose a sub-mode, drag-select the subject in the camera view. Tap Start, the aircraft will
start flying and recording automatically. The aircraft will fly back to its original position once
recording is finished.
4. Tap
to access, edit, or share the video to social media.
Exiting QuickShots
Press the Flight Pause button once or tap in DJI Fly to exit QuickShots. The aircraft will brake
and hover. Tap the screen again and the aircraft will continue shooting.
Asteroid:
The aircraft flies backward and upward, takes several photos, and then flies
back to the starting point. The video generated starts with a panorama of the highest
position and then shows the view from the aircraft as it descends.
• Make sure there is sufficient space when using Boomerang. Allow a radius of at least 30
m (99 ft) around the aircraft and a space of at least 10 m (33 ft) above the aircraft.
• Make sure there is sufficient space when using Asteroid. Allow at least 40 m (131 ft)
behind and 50 m (164 ft) above the aircraft.