Crestron electronic 7" Room Scheduling Touchscreen with Light Bar for Rooms (Black Smooth) - Manual (Page 88)

84 • TSS-70 Series Product Manual — Doc. 8745H
Select a Wi-Fi Access Point
On the Wi-Fi Setup screen, tap Select Wi-Fi Access Point. The Connect to a Wi-Fi Access Point (1-2-3)
screen is displayed.
Connect to a Wi-Fi Access Point (1-2-3) Screen
Use the Connect to a Wi-Fi Access Point (1-2-3) screen to connect the touch screen to an existing
WAP that is in range or to configure a new WAP. Any WAPs that are in range and discoverable are
displayed under Step 1 - Select a WAP upon successful discovery.
To set up a Wi-Fi network connection:
1. Select the desired WAP from the options shown underneath Step 1 - Select a WAP. If the desired
WAP is not shown, tap Add New.
NOTE: The WAP Name (SSID) and Security fields are populated automatically when a
discovered WAP is selected. This information must be entered manually when adding a new
WAP.
2. Tap the WAP Name (SSID) text field to display an on-screen keyboard.
3. Enter or modify the WAP name if necessary, and then tap SAVE.