Services – Crestron electronic 7" Room Scheduling Touchscreen with Light Bar for Rooms (Black Smooth) User Manual
Page 119
Product Manual — Doc. 8745H
TSS-70 Series • 115
Select the + (plus) icon next to Wi-Fi to display the following Wi-Fi network settings:
l
Adapter Enabled: Turn on the toggle to use the touch screen Wi-Fi adapter, which allows the
touch screen to make a Wi-Fi network connection.
l
Domain: Enter the fully qualified domain name on the network.
l
IPv4: Use these settings to configure IPv4 Wi-Fi network addressing on the network.
o
DHCP: Turn on the toggle to use DHCP for the IPv4 Wi-Fi network connection.
NOTE: If DHCP is turned on, IP does not function until a reply has been received from
the server. The touch screen broadcasts requests for an IP address periodically.
o
IP Address: Enter the touch screen IPv4 Wi-Fi network address on the network.
o
Subnet Mask: Enter the touch screen subnet mask address on the network.
o
Default Gateway: Enter the gateway router address on the network.
l
Wi-Fi Access Points
o
Scan Wi-Fi Access Points: Scans the network for any open Wi-Fi access points. All
discovered access points are displayed in the Select Discovered Access Points menu.
o
Select Discovered Access Points: Select an access point after completing a scan. Enter text
in the search field to search for a specific Wi-Fi access point name.
o
Add Access Points: Adds the chosen access point entry from the Select Discovered Access
Points field to the table below.
Each added Wi-Fi access point is displayed in a table that contains the following information.
l
SSID: Enter or modify the SSID (name) of the Wi-Fi access point.
l
Encryption Key: Select the security/encryption type used by the Wi-Fi access point.
l
Password: Enter the password used to connect to the Wi-Fi access point.
l
Active Access Point: Indicates whether a connection to the Wi-Fi access point is active
Select Add to add a new entry to the Wi-Fi access point table. After selecting one more entries in the
Wi-Fi access point table, select Remove to delete the selected entries.
Services
Select Services to configure Crestron Fusion® software settings.
Settings Tab - Services