beautypg.com

Crestron electronic 7" Room Scheduling Touchscreen with Light Bar for Rooms (Black Smooth) User Manual

Page 118

background image

114 • TSS-70 Series

Product Manual — Doc. 8745H

l

Hostname: Enter the touch screen host name.

l

IPv6 Enabled: Turn on the toggle to use IPv6 addressing for the touch screen.

l

Primary Static DNS (IPv6): If IPv6 Enabled is turned on, enter the primary DNS address used to
resolve the touch screen domain to an IPv6 address.

l

Secondary Static DNS (IPv6): If IPv6 Enabled is turned on, enter the secondary DNS address used
to resolve the touch screen domain to an IPv6 address.

l

Primary Static DNS (IPv4): Enter the primary DNS address used to resolve the touch screen
domain to an IPv4 address.

l

Secondary Static DNS (IPv4): Enter the secondary DNS address used to resolve the touch screen
domain to an IPv4 address.

Select the + (plus) icon next to Primary LAN to display the following Ethernet settings:

l

Adapter Enabled: Turn on the toggle to use the touch screen Ethernet adapter, which allows the
touch screen to make an Ethernet connection.

l

Domain: Enter the fully qualified domain name on the network.

l

IPv4: Use these settings to configure IPv4 Ethernet addressing on the network.

o

DHCP: Turn on the toggle to use DHCP for the IPv4 Ethernet connection.

NOTE: If DHCP is turned on, IP does not function until a reply has been received from
the server. The touch screen broadcasts requests for an IP address periodically.

o

IP Address: Enter the touch screen IPv4 Ethernet address on the network.

o

Subnet Mask: Enter the touch screen subnet mask address on the network.

o

Default Gateway: Enter the gateway router address on the network.

l

IPv6: Use these settings to configure IPv6 Ethernet addressing on the network.

o

Default Gateway: Enter the gateway router address on the network.

o

IPv6 Address with Prefix: With IPv6 Enabled turned on, use the provided table to add IPv6
Ethernet addresses to the touch screen.

n

Select Add to add a new IPv6 Ethernet address to the touch screen.

n

Enter the following information for each entry:

n

Enter the IPv6 Ethernet address into the Enter IPv6 Address text field.

n

Enter the prefix for the IPv6 Ethernet address into the text field following the
address.

n

If desired, use the copy button

to copy the IPv6 Ethernet address to the

clipboard.

n

To remove an entry, fill the checkbox to the left of the table entry, and then select
Remove.

NOTE: An "x" icon is shown to the right of the IPv6 Ethernet address prefix in a table
row if the IPv6 address format is invalid or is missing a prefix. Hover over the icon to
view a message explaining the issue.

This manual is related to the following products: