beautypg.com

Configure the zoom rooms application, Configure the – Crestron electronic 7" Room Scheduling Touchscreen with Light Bar for Rooms (Black Smooth) User Manual

Page 72

background image

68 • TSS-70 Series

Product Manual — Doc. 8745H

Configure the Zoom Rooms Application

The TSS-770-Z-LB and TSS-1070-Z-LB kits ship with a USB drive that boots the included touch screen
directly into Zoom Rooms scheduling mode. The application must be configured prior to use.

NOTE: A Zoom Rooms account is required for configuration. Refer to your IT administrator for
assistance.

To configure the Zoom Rooms application on the touch screen:

1. Insert the included USB drive into the touch screen USB port while the touch screen is powered

off. Refer to

Connect the Touch Screen on page 60

to locate the USB port.

NOTE: If the USB drive is not inserted into the touch screen before power is applied, the touch
screen will boot its default mode (Crestron Room scheduling) instead.

2. Apply power to the touch screen. The Zoom Rooms application user interface is displayed on the

touch screen following the boot.

This manual is related to the following products: