Crestron electronic 7" Room Scheduling Touchscreen with Light Bar for Rooms (Black Smooth) - Manual (Page 101)

Product Manual — Doc. 8745H TSS-70 Series • 97
Web Configuration
The touch screen may be monitored and configured using the included web configuration interface. The
configuration interface is accessible from a web browser if the touch screen IP address is known.
The web configuration interface is also accessible through the XiO Cloud® service. For more information,
refer to
Installation on page 57 .
To access the configuration interface:
1. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen and its
IP address on the network.
2. Open a web browser.
3. Enter the touch screen IP address into the browser URL field. The configuration interface is
displayed (TSS-770 shown).
NOTE: If authentication is turned on for the touch screen, an administrator username and
password must be entered prior to accessing the web configuration interface. For more
information on configuring authentication settings, refer to
Web Configuration on page 97 .
Web Configuration Interface
The configuration interface provides the following tabs:
l
Status: Used to monitor touch screen status
l
Settings: Used to configure touch screen settings