Crestron electronic 7" Room Scheduling Touchscreen with Light Bar for Rooms (Black Smooth) - Manual (Page 112)

108 • TSS-70 Series Product Manual — Doc. 8745H
l
NTP Time Servers: With Time Synchronization turned on, use the provided table to enter
information regarding the SNTP server(s) used to synchronize the date and time for the touch
screen.
o Select Add to add a new SNTP server entry into the table.
o Enter the following information for each entry:
n Enter the SNTP server address into the Address text field.
n Enter the SNTP server port into the Port text field.
n Use the Authentication Method drop-down menu to select the authentication
method used to access the SNTP server (if one exists).
n If an authentication method is selected, enter the key used to authenticate against
the SNTP server into the Authentication Key text field.
n If an authentication method is selected, enter the ID for the key used to authenticate
against the SNTP server into the Key ID text field.
o To remove an entry, fill the checkbox to the left of the table entry, and then select Delete.
Time Configuration
l
Time Zone: Select a time zone for the touch screen using the drop-down menu.
l
Date: Select the date for the touch screen using the pop-up calendar that is displayed.
l
Time Format: Select the format that the time will display on the touch screen (12 hour or 24 hour).
l
Date Format: Select the format that the date will display on the touch screen using the drop-
down menu.
l
Time: Select the time for the touch screen (in 24-hour format) using the pop-up menu that is
displayed.