Crestron electronic 7" Room Scheduling Touchscreen with Light Bar for Rooms (Black Smooth) - Manual (Page 102)

98 • TSS-70 Series Product Manual — Doc. 8745H
l
Security: Used to enable authentication and other security settings
l
802.1x Configuration: Used to configure IEEE 802.1X network authentication for touch screen
security
NOTE: Some device settings may be displayed or hidden depending on the selected application
mode.
If the Crestron room scheduling application is running on the touch screen, the web configuration utility
provides additional configuration options for the room scheduling application. For more information,
refer to the
Crestron Room Scheduling Panels Operations Guide .
The Status tab is the default tab that is displayed, as shown in the previous image.
Actions Menu
The configuration interface provides an Actions drop-down menu on the top right of the page. The
Actions menu may be accessed at any time.
Actions Menu
Once any changes have been made to the touch screen configuration, the Actions button changes to a
Save Changes button. Select Save Changes to save changes to the configuration settings.
If a restart is required after changes have been saved, a dialog box is displayed asking whether the
restart should be performed. Select Yes to restart the device or No to cancel the restart.
The Actions menu provides the following selections.
Save Changes
Select Save Changes to save any changes made to the configuration settings.