Configure the touch screen – Crestron electronic 7" Room Scheduling Touchscreen with Light Bar for Rooms (Black Smooth) User Manual
Page 66

62 • TSS-70 Series
Product Manual — Doc. 8745H
Configure the Touch Screen
When power is applied for the first time, the touch screen boots with the Crestron room scheduling
application selected by default. The touch screen may take up to two minutes to boot.
Device settings for the touch screen may be configured using the built-in setup screens or the web
configuration interface. For more information on configuring the touch screen, refer to
.
NOTES:
l
The touch screen included in the TSS-770-T-LB or TSS-1070-T-LB kits boots to the Microsoft
Teams Panels scheduling application setup screen by default. To configure the application,
refer to
l
The touch screen included in the TSS-770-Z-LB or TSS-1070-Z-LB kits boots to the Zoom
Rooms scheduling application setup screen when the provided USB drive is installed before
applying power. To configure the application, refer to
Configure the Zoom Rooms Application
.
l
To access the device setup screens for these touch screens, refer to