Create an admin account – Crestron electronic 7" Room Scheduling Touchscreen with Light Bar for Rooms (Black Smooth) User Manual
Page 68
64 • TSS-70 Series
Product Manual — Doc. 8745H
NOTE: The device may be disconnected from the XiO Cloud service by navigating to the Cloud
Services tab in Crestron Toolbox™ software (Functions > Device Info > Cloud Services). For details,
refer to the Crestron Toolbox help file.
To connect the device to the XiO Cloud service:
1. Record the MAC address and serial number that are labeled on the shipping box or the device. The
MAC address and serial number are required to add the device to the XiO Cloud service.
NOTE: If the device has multiple MAC addresses, use the MAC address that is providing the
primary connection back to the network. For most devices, the Ethernet MAC address should
be used. However, if your device is connecting to the network over a different protocol (such
as Wi-Fi® communications), use the MAC address for that protocol instead.
2. Log in to your XiO Cloud account at
3. Claim the device to the XiO Cloud service as described in the
Select the device from the cloud interface to view its status and settings. The device may now also be
managed and assigned to a group or room. For more information, refer to the
.
NOTE: For XiO Cloud accounts with room-based licenses, the device must be added to a licensed
room before its status and settings can be viewed.
Create an Admin Account
The first time the web configuration interface is accessed, a page is displayed asking the user to create
an admin account. A similar message is displayed when connecting to the control system in Crestron
Toolbox software if an admin account has not already been created.
To create an admin account:
1. Enter a username and password for the admin account in the appropriate text fields.
CAUTION: Do not lose the username and password for the admin account, as the control
system must be reset to factory settings to regain access.
2. Select OK to create the admin account. The web configuration interface refreshes to show the
standard login page.
3. Reenter the credentials created in step 1 and select Sign In.
NOTE: The username and password must also be entered when connecting from
Crestron Toolbox or XPanel.