Crestron electronic 7" Room Scheduling Touchscreen with Light Bar for Rooms (Black Smooth) - Manual (Page 126)

122 • TSS-70 Series Product Manual — Doc. 8745H
Select Delete All to delete all existing SNMP users. When a dialog box is shown asking whether all
SNMP users should be deleted, select Yes.
Select Add User to add a new SNMP user. The Add SNMP Configuration dialog box is displayed.
Add SNMP Configuration Dialog Box
Enter the following information for the SNMP user:
l
Manager Name: Enter the SNMP manager name for the user.
l
IP Address/Host Name: Enter the IP address or host name of the SNMP manager.
l
Community Name: Enter the SNMP community (user) name.
l
Write Access Level: Use the drop-down menu to select whether the user has write level access
(True) or read-only access (False).
l
SNMP Version: Use the drop-down menu to select the SNMP version used by the manager.
l
SNMP Authorization Protocol: If required, use the drop-down menu to select the authorization
protocol used by the SNMP manager.
l
SNMP Privacy Protocol: If required, use the drop-down menu to select the privacy protocol used
by the SNMP manager.
l
SNMP Security Password: If required, enter the security password for the SNMP manager.
l SNMP Privacy Password: If required, use the privacy password for the SNMP manager.
Select OK to create the new user. The user is added to the table within the SNMP Configuration
accordion.