ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 94)

Lens & Electronic Control System (ECS) 94
Active white radio and set channel number is indicated through the white radio icon dis-
played on the HOME screen as well as in the Status Info.
To connect a hand unit to the camera set the hand unit's radio channel to the same value. Make
sure that each camera on set uses its own white radio channel. It is not supported that one hand
unit connects to two cameras in parallel.
Info: When using white radio and WiFi simultaneously it is important to configure the used channels
to avoid interference and guarantee optimal performance. See the channel configuration table in the
WiFi chapter "WiFi Host Channel" for more information.
► MENU > Lens & ECS > Radio > Status shows the current status of the white radio module:
Off
Init
Ready
Blocked White Radio is disabled.
White Radio is initializing
White radio is initialized and ready to be used.
Selected White Radio channel is already used by another camera on set.
► MENU > Lens & ECS > Radio > Connected Devices displays the amount of hand units connected
to the camera. Up to three hand units can connect to one camera in parallel.
Region Setting
The wireless region setting specifies the region the white radio can be used in compliance with local
regulations.
ADVICE
Please ensure that the region is configured correctly, as it may be illegal to use White Radio in a
region other than specified in the setting. All settings are compliant to FCC and IC regulations.
► Select MENU > Lens & ECS > Radio > Wireless Region Setting to set the region.
The following options are available:
Australia
Canada
China
Egypt
Europe
Hong Kong India
Israel
Japan
New Zealand
Philippines
Singapore South Africa
South Korea
Taiwan
Thailand
UAE
USA World
► Select World if your specific region is not listed.