3 frame lines, Frame lines – ARRI ALEXA 35 Body & PL Mount Set (LBUS) User Manual
Page 66
Monitoring
66
Info:
Magnification can only be applied on the SDI output(s) with
SDI Image
set to
Processed
.
Magnification is not available when using 2K or HD Recording Resolutions.
Magnification is reset to 100% when Sensor Mode or Recording Resolution is changed.
Magnification range is limited when using UHD SDI formats (6G and 12G).
14.3 Frame Lines
To aid in framing, the camera offers to display frame lines overlaid over the live image. Frame lines can
be considered electronic versions of ground glass markings in film cameras. You can configure which
frame line the camera should show and how it should be displayed (color and opacity). You can also
configure up to two user rectangles which allow you to mark a rectangular area on the image, e.g. for
marking an area that you need to keep clear during shooting for later VFX insertion. Custom frame lines
can be created using the online
. A standard set of frame lines for
different aspect ratios is provided in the camera, the availability depends on the selected sensor mode.
Setting the Frame Line
► Select
MENU > Monitoring > Frame Lines > Frame Line
.
► Select a frame line from the list or
a custom frame line from an inserted USB medium or the
defaults list.
Info:
Frame lines can be only loaded if their aspect ratio matches the aspect ratio of the set sensor
mode.
Setting the Center Mark
As already common for ground glasses for film cameras, the camera offers to display a center mark on
each monitoring output.
► Select
MENU > Monitoring > VF > EVF Overlays > Center Mark
to configure the center mark for the
EVF.
► Select
MENU > Monitoring > VF > Monitor Overlays > Center Mark
to configure the center mark for
the Monitor.
► Select
MENU > Monitoring > SDI > SDI 1 Processing > Overlays
to configure the center mark for
the SDI 1 output.
► Select
MENU > Monitoring > SDI > SDI 2 Processing > Overlays
to configure the center mark for
the SDI 2 output.
Following options are available:
Off
Dot
Dot Small
Cross
Cross Small
Center mark is switched off.
Center mark is displayed as a dot.
Center mark is displayed as a small dot.
Center mark is displayed as a cross.
Center mark is displayed as a small cross.
Application of Frame Lines and Center Mark on Monitoring Outputs
For each monitoring output the camera offers to enable/disable display of frame lines and center mark.
► Select
MENU > Monitoring > VF > EVF Overlays > Frame Lines
to toggle display of frame lines and
center mark on the EVF.
► Select
MENU > Monitoring > VF > Monitor Overlays > Frame Lines
to toggle display of frame lines
and center mark on the Monitor.
► Select
MENU > Monitoring > SDI > SDI 1 Processing > Overlays > Frame Lines
to toggle display of
frame lines and center mark on the SDI 1 output.