ARRI ALEXA 35 Body & PL Mount Set (LBUS) User Manual

Page 26

Menu Operation

Adding Entries to Value based Lists

The camera offers two methods of input when adding entries to a list. The numeric keyboard is

intended to be used for direct input of a value while the jogwheel mode is intended to be used for

fine tuning a value (for example to fine adjust the shutter when filming monitors). The minimum and

maximum possible values are shown in the middle of the screen above the horizontal line.
► Select e.g.

HOME > FPS > ADD

► Press the

MODE

button (2) to switch be-

tween the numeric keyboard and the jog-

wheel mode.

► The numeric keyboard offers to directly en-

ter a value. Use the MVF-2 jogwheel to se-

lect and confirm digits.

► The

CLEAR

button (4) deletes the digit to

the left of the cursor. Press and hold the

button to clear the entire value.

► The jogwheel mode allows to fine adjust

values. Rotate the MVF-2 jogwheel to fine

tune the value.

► Press the

MODE

button (2) to if you need to

switch back to the numeric keyboard.

► Press the

SET

button (3) to add the new value to the presets list, or the

CANCEL

button (1) to exit.

Info:

the

SET

button will be grayed out and the value displayed in red if the entered value is out of

range.

Importing Files

For looks, frame lines, user setups and lens tables the camera offers the option to import files from

the USB medium as well as from a factory default presets. To import files from a USB medium into

the camera, the USB medium needs to be prepared with a certain folder structure, see chapter

"User

Storage Handling"

for more information. The maximum file name length allowed is 64 characters

including the file extension. Files with a name exceeding 64 characters cannot be displayed in camera

lists. Special characters <, >, :, “, /,\, | and * in file names are displayed and replaced with a ”?“ in the

camera menu.
► Select e.g.

MENU > Monitoring > Frame Lines > Frame Line > ADD

► Select a frame line file to import from the

USB

list or select

DEFAULTS

(2) to select a

frame line file from the factory defaults list.

► Press the

IMPORT

button (3) or the jog-

wheel to add the selected frame line to the

frame lines list, or the

CANCEL

button (1) to

exit.