ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 70)

Monitoring 70
Red
Green
Blue Cyan
Magenta
Yellow White
Activation of Peaking
User Buttons VF Peaking and SDI 1 Peaking support to quickly enable/disable peaking on the
respective output.
Active peaking is indicated through the peaking icon displayed in the Status Info of the respective output.
14.6 Zoom
The camera supports to zoom into the image e.g. to better judge focus. Zoom is essentially a shortcut
to quickly achieve maximum Magnification. The camera offers six zoom positions: center, top left,
top center, top right, bottom right and bottom left. While Zoom is activated, the zoom position can be
changed by using the jogwheel, the soft buttons on the MVF-2 (if the Monitor is flipped out and set to
display the live image) or through user buttons. Active Zoom is indicated by an orange frame around
the image. Frame lines and anamorphic desqueeze are temporarily deactivated while Zoom is active.
► Press the ZOOM button to activate/deactivate
Zoom on EVF and Monitor.
► To change the Zoom position, rotate either the jog-
wheel or the user wheel.
Info: Changing the zoom position using the jog-
wheel or user wheel is not supported when the
Monitor is set to display the HOME screen or the
camera menu.
1
User Buttons VF Zoom, VF Zoom Position, VF Zoom (Smart) support to quickly enable/disable
and adjust zoom for the viewfinder.
Zoom on SDI
Zoom on the SDI outputs can only be activated through a user button. The camera offers three
SDI Zoom related user button functions:
► Select MENU > User Buttons and assign SDI 1 Zoom or SDI 2 Zoom to the desired button.
The user button activates/deactivates Zoom on the respective SDI output.
► Select MENU > User Buttons and assign SDI 1 Zoom Position or SDI 2 Zoom Position to the
desired button.
While Zoom is activated, the user button changes the Zoom position on the respective output.
► Select MENU > User Buttons and assign SDI 1 Zoom (Smart) or SDI 2 Zoom (Smart) to the desired
button.
The user button activates Zoom on the first button press, further button presses change the zoom
position and a button long press deactivates Zoom.
Info: Zoom is not available when using 2K or HD recording resolutions.