ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 81)

System Settings 81
18 System Settings
18.1 Language Setting
► Select MENU > System > Language to set the system language between English and Chinese
(simplified).
18.2 System Time and Date
► Select MENU > System > System Time + Date to set the system time and date.
18.3 Button and Display Settings
► Select MENU > System > Buttons + Display > Display Style to set the display style between Day or
Night .
► Select MENU > System > Buttons + Display > Button Brightness or
► Select Side Display > Settings > Button Brightness
to set the brightness of camera and MVF-2 buttons from 0 (off) to 4 (the highest brightness).
18.4 Fan Settings
Select to set the fan mode to Low Noise for locations with ambient temperatures up to 30°C (86°F). For
locations with ambient temperatures higher than 30°C (86°F), set to Rec Low .
► Select MENU > System > Fan Mode .
Following options are available:
Rec Low Increases fan speed during standby to cool the camera. Minimizes fan speed/noise during
recording. Ideal in an environment warmer than 30 °C (86 °F).
Low Noise Minimizes fan noise during standby and recording.
Info : With data rates above 100 MB/s (due to fps/codec setting), the fan speed automatical-
ly increases to prevent the camera from overheating.
18.5 Reset of Electronic Horizon
► Select MENU > System > Reset Electronic Horizon .
► Place the camera on a level surface and press RESET .
Info: A message is displayed if either the roll, the tilt or both values exceed the calibration range
and resetting is not possible.