ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 62)

Playback 62
13 Playback
In-camera playback plays back the clips on the recording media at their project frame rate and is output
to EVF, Monitor, SDI 1 and SDI 2. Playback can be controlled from a variety of locations such as the
MVF-2, the camera's side display, the Web Remote, the Camera Companion App or hand units such as
the Hi5.
Playback Control via MVF-2
► Press and hold the PLAY button (1) of the MVF-2 for
one second to start playback.
► Toggle between play and pause by briefly pressing the
PLAY button.
► To exit playback press and hold the PLAY button for one
second.
1
The playback screen of the MVF-2 offers the following controls:
1
2 Skip reverse
Cliplist Loads the previous clip from the cliplist.
Select another clip for playback from a list of
all clips on the recording medium.
3
4
5
6 Skip forward
Close
Play/pause
Options Loads the next clip from the cliplist.
Exits playback.
Toggles between play and pause.
Allows setting the clip end action.
Play/pause can also be toggled by pressing the PLAY button on the MVF-2 or by pressing the jogwheel.
While playback is paused, rotate the jogwheel to scroll through the clip frame by frame. During
playback, you can use the jogwheel to increase or decrease the playback speed by up to 512x forward
or backward.
The cliplist lists all clips contained on the recording medium:
► Start Playback and select CLIPLIST
► Rotate the jogwheel to select a clip:
The first frame of the selected clip is displayed on
all monitoring outputs for preview. The clip's prop-
erties are displayed in the info panel on the right:
Codec, Recording Resolution, Record FPS, Tex-
ture, Look and Look Intensity, start TC and clip du-
ration.
Look and Look Intensity are displayed in gray if
the look the clip was recorded with does not corre-
spond to the currently set look.
► Press the jogwheel or the SET button to play the
clip, press CANCEL to return to the playback
screen.