ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 69)

Monitoring 69
Additionally, False Color can be activated in the camera menu:
► Select
MENU > Monitoring > SDI > SDI 1 Processing > False Color to activate False Color on the
SDI 1 output.
► Select MENU > Monitoring > SDI > SDI 2 Processing > False Color to activate False Color on the
SDI 2 output.
Active False Color is indicated by the exposure tool icon in the Status Info of the respective
output.
14.5 Peaking
Peaking highlights in-focus areas for better focus control.
Info: Peaking is not supported on SDI 2.
Peaking Mode
► Select MENU > Monitoring > Peaking > VF Peaking Mode to set the preferred peaking mode for
EVF and Monitor.
► Select MENU > Monitoring > Peaking > SDI 1 Peaking Mode to set the preferred peaking mode for
SDI 1.
Following options are available:
Color
Aperture Color peaking overlays in-focus areas with a selected color.
Aperture peaking enhances object edges only.
Peaking Level
► Select MENU > Monitoring > Peaking > VF Peaking Level to set the peaking strength for EVF and
Monitor.
► Select MENU > Monitoring > Peaking > SDI 1 Peaking Level to set the peaking strength for SDI 1.
► Set the peaking level from 1 (the minimum strength) to 20 (the maximum strength).
Offset Shift
The peaking offset shift sets the threshold for Color Peaking to become active, relative to the peaking
level.
► Select
MENU > Monitoring > Peaking > VF Peaking Offset Shift to set the peaking offset for EVF
and Monitor.
► Select MENU > Monitoring > Peaking > SDI 1 Peaking Offset Shift to set the peaking offset for SDI
1.
► Set the offset shift from -5 (the minimum) to +5 (the maximum).
Color
Select the color for Color Peaking.
► Select
MENU > Monitoring > Peaking > VF Peaking Color to set the color for color peaking on EVF
and Monitor.
► Select MENU > Monitoring > Peaking > SDI 1 Peaking Color to set the color for color peaking on
SDI 1.
Following options are available: