ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 109)

ALEXA 35 Accessories 109
Viewfinder Mounting Bracket VMB-5 K2.0033859
The Viewfinder Mounting Bracket VMB-5 offers a longer reach than traditional viewfind-
er brackets and is the most flexible and comfortable method to attach a viewfinder to a
camera. Positioning the viewfinder in a 360° arc is done by loosening a single thumb
screw and freely repositioning the viewfinder, which will remain in place thanks to double
friction based clamping mechanisms.The VMB-5 is compatible with all standard ARRI
viewfinder extension brackets and viewfinder adapters. Requires SAS-1 for attachment
to a camera.
Square Accessory Sleeve SAS-1 K2.0033733
The Square Accessory Sleeve SAS-1 is required to mount the VMB-5 to your camera
and has been designed with a rectangular rod to prevent the viewfinder falling when
loosening the adjustment clamp. The SAS-1 has been designed with the CCH-5 top han-
dle in mind, but can be mounted to any two M4 attachment points spaced 20 mm apart,
as regularly found on ARRI camera accessories.
Viewfinder Cross Pipe K2.0013302
The Viewfinder Cross Pipe can be used in combination with the RMB-3 or RMB-7 to cre-
ate a basic, simple viewfinder mounting bracket.
Mini Viewfinder Bracket MVB-1 K2.0006140
The Mini Viewfinder Bracket MVB-1 allows the MVF-1 viewfinder to attach to the ALEXA
Mini and it allows the MVF-2 viewfinder to attach to the ALEXA 35 or ALEXA Mini LF.
This is the traditional viewfinder mounting method found on ALEXA, ALEXA Mini and
ALEXA Mini LF cameras.
The Adjustable Top Plate for MōVI (K2.0024181)
The Adjustable Top Plate for MōVI connects any top accessory plate with two 3/8-16 or
two 1/4-20 attachment points quickly to a MōVI Pro or M15 rig.