ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 24)

Menu Operation 24
Clip Information
Displays the current reel name, the current clip number and the duration of the current clip (while record-
ing) or of the last recorded clip (during standby).
Battery Status and Texture
Displays the status of the power inputs and the active texture.
Media Capacity & Recording and Look Settings
Displays the remaining capacity of the recording medium, the active recording processing (ARRIRAW or
LogC4) and the active look file.
Status Icons:
The microphone icon indicates that the internal
microphones are active.
Internal microphones are muted.
WiFi is active and in client mode. The camera
is connected to a network.
WiFi is active and in client mode. The camera
is not connected to a network.
WiFi is active and in host mode.
The ARRI ECS White Radio is active and uses
the displayed channel number.
MVF-2 Lock Icon. MVF-2 buttons are locked. Camera Lock Icon. Camera buttons are locked.
The Genlock icon indicates that the camera is
synchronized to a Genlock or timecode signal.
The icon turns orange when the source signal
is missing or is not usable.
The MVF-2 eyepiece heater is on. The icon
turns gray when the heater is not heating (eye-
piece temperature is > 15 °C (59 ° F)).
The CAL icon indicates that a lens motor cali-
bration is required. The icon turns black when
calibration is in progress and expires when cal-
ibration has finished.
Indicates that the LDS interface is disabled.
The USB icon indicates a connected USB
medium. The icon turns gray when the medium
is read only, and orange if the medium is not
usable.
The Frame Grab icon indicates active frame
grabbing. The icon turns orange if frame grab-
bing failed (e.g. no USB medium is inserted).
The temperature icon indicates that the camera
temperature is increased. The icon turns red
when the camera temperature is out of range.
The fan icon indicates that the camera needs
to increase the fan speed above 20 dB noise
emission level. The icon turns orange when the
fan speed exceeds 20 dB.
Indicates an active alert state. See MENU > Alerts for detailed information.