ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 61)

Recording 61
Off
L
L + R
R The audio channel is not output on the headphones.
The audio channel is output on headphones left.
The audio channel is output on headphones left and right.
The audio channel is output on headphones right.
► Select MENU > Recording > Audio Recording > VF Headphone Volume to adjust the volume of the
headphones connected to the MVF-2.
Reference Tone
A 1 kHz sine reference tone can be output on the SDI outputs and the headphone outputs of MVF-2
and AEM-1. If a recording is started during this time, the test tone is also recorded in all active audio
channels of the clip.
► Select
MENU > Recording > Audio Recording > Reference Tone .
Following options are available:
Off -9 dBFS - 18 dBFS -20 dBFS
Info: The reference tone can only be activated when audio recording is enabled.
User Buttons Audio Ch1 Increase, Audio Ch1 Decrease, Audio Ch2 Increase ,
Audio Ch2 Decrease support to quickly adjust gain of channels 1 and 2.
User Button
Audio Mute int. Mic mutes the internal microphones.
User Button Audio Solo allows each channel to be monitored individually while the other
channels are muted.
12.8 Rec Beeper and Tally
► Select MENU > Recording > Rec Beeper / Tally .
Following options are available:
Rec Start Beeper
Rec Stop Beeper
Media Full Beeper The camera gives an acoustic indication at start of recording.
The camera gives an acoustic indication at stop of recording.
The camera gives an acoustic indication for stopping recording due to full recording medi-
um. For better distinction, a different sound pattern than the start/stop beeper is used.
Tally MVF-2 Enables the tally light on the MVF-2.