ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 87)

Network 87
Icons on the HOME screen and the Status Info indicate the WiFi status:
Host mode is enabled.
Client mode is enabled, connection to a network has been established.
Client mode is enabled, camera is not connected to a network.
WiFi Host Channel
► Select MENU > System > Network / WiFi > WiFi Host Channel .
► Select Automatic to have the camera automatically select the WiFi host channel with the best
performance, or select a WiFi channel between 1 and 11.
With the
Automatic setting, the camera will rediscover the best WiFi host channel each time the
camera is booted or WiFi is turned on. Select Automatic from the list again to trigger a new scan.
When using WiFi and White Radio simultaneously, it is important to configure the used channels
to avoid interference and guarantee optimal performance. The following table gives an overview of
suitable channel configurations:
WiFi Password (Host Mode)
The camera uses WPA-2 encryption and requires a password when connecting to it via WiFi. The
default password is “arriarri”.
► Select
MENU > System > Network / WiFi > WiFi Host Password to set the WiFi password. The WiFi
password must be between 8 and 32 characters long.
Connect to a Network (Client Mode)
► Select MENU > System > Network / WiFi > WiFi Network and select the desired network from the
list.
If the selected WiFi network uses encryption, you are prompted to enter the password.
► Enter the password and press CONNECT .
Connect to a Network using a QR Code (Client Mode)
You can use a QR code to connect to a WiFi network. The WiFi credentials need to be provided in the
following format:
WIFI:S:
my-ssid ;T: [WEP|WPA|WPA2] ;P: my-password ;;