ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 88)

Network 88
where the italic parts need to be replaced with your network credentials.
► Select
MENU > System > Network / WiFi > WiFi Network > SCAN QR .
► Hold the QR-Code in front of the lens so that it fills the frame and is in focus.
A popup window with QR-Code data is displayed.
► Press CONNECT .
Disconnect from Network (Client Mode)
► Select MENU > System > Network / WiFi > WiFi Network .
► Press DISCONNECT .
If the network you were connected to is hidden, it will disappear from the network list shortly after.
20.2 Ethernet Settings
LAN IP Mode
► Select MENU > System > Network / WiFi > LAN IP Mode .
Following options are available:
Static Select for manually entering an IP address and subnet mask.
DHCP Select to let the camera accept a dynamically assigned IP address from an DHCP server.
LAN Static IP
► Select MENU > System > Network / WiFi > LAN Static IP to set the desired LAN Static IP adress.
LAN Static Subnet
► Select MENU > System > Network / WiFi > LAN Static Subnet to set the desired LAN Static subnet.
LAN Static Gateway
► Select MENU > System > Network / WiFi > LAN Static Gateway to set the desired LAN Static
gateway.
20.3 Streaming Metadata
The camera supports to stream real time metadata via Ethernet, to be used in virtual studios (aka
volumes with an LED wall, aka mixed reality production systems). For more information please refer to
the ARRI Live Link Metadata Manual, available in the White Papers section on the ARRI website.
Streaming Addressing
► Select MENU > System > Network / WiFi > Streaming Metadata > Streaming Addressing to set the
type of addressing.
Following options are available:
Unicast
Multicast The metadata is transmitted from the camera to an endpoint via any nodes.
The metadata is transmitted to multiple recipients or to a closed group of recipients.