ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 84)

User Setups 84
19 User Setups
A user setup is a profile of the current settings on the camera that can be saved on camera and/or to
a USB memory stick. User setups can be given custom names, saved to the USB memory stick and
loaded onto multiple cameras. Rather than resetting the camera to its factory default settings, a user
setup can be used to reset the camera to a user's default settings.
User setups can be used to ensure that cameras on multi camera shoots have matching settings, or to
transfer a show’s setup onto daily cameras, to ensure they carry the same shooting specifications.
Saving a User Setup
You can save the current setup configuration in the camera or to the USB medium.
► Select
MENU > Setup > User Setups Installed > Save to save the setup in the camera.
Select MENU > Setup > User Setups on USB > Save to save the setup on the USB medium.
► Use the onscreen keyboard to enter a name for the user setup and press SAVE .
A screen is displayed to select the setup parameter blocks with following options:
General
Format
Scene
Lens
User Groups the general camera configuration and basic project settings.
Saves set codec, sensor mode and recording resolution.
Saves scene related parameters such as Shutter and Exposure Index.
Saves active lens table setting to quickly change between lens configurations.
Stores all parameters for camera personalization (overlays etc.)
► Select one or more options and press CONFIRM .
Loading a User Setup
► Select MENU > Setup > User Setups Installed to load a setup from the camera.
Select MENU > Setup > User Setups on USB to load a setup from the USB medium.
► Select a user setup from the list and press LOAD .
A pop up window with the parameter blocks of this user setup is displayed.
► Press CONFIRM .
The camera loads the selected user setup and shows a result message. The pop up highlights the
parameters that you should check in case certain parameters could not be loaded.
Factory Reset
You can reset the camera to the ARRI factory default values.
► Select
MENU > Setup > Factory Reset .
► Press RESET .
The camera settings are reset to factory defaults.
Info: A factory reset does not delete user setups stored/installed on camera.