ProSoft Technology PLX31-EIP-SIE - Manual (Page 75)

PLX3x Series EIP Protocol
Ethernet and Serial Gateways User Manual
ProSoft Technology, Inc. Page 75 of 218
September 17, 2014
Code (Int) Code (Hex) Description
-4070 0xF01A File is open; another node owns it
-4069 0xF01B Another node is the program owner
-4068 0xF01C Reserved
-4067 0xF01D Reserved
-4066 0xF01E Data table element protection violation
-4065 0xF01F Temporary internal problem
Gateway Specific Error (not EIPCompliant)
Code (Int) Code (Hex) Description
-1 0xFFFF CTS modem control line not set before transmit
-2 0xFFFE Timeout while transmitting message
-10 0xFFF6 Timeout waiting for DLE-ACK after request
-11 0xFFF5 Timeout waiting for response after request
-12 0xFFF4 Reply data does not match requested byte count
-20 0xFFEC DLE-NAK received after request
-21 0xFFEB DLE-NAK sent after response
-200 0xFF38 DLE-NAK received after request
TCP/IP Interface Errors
Error (Int) Error (Hex) Description
-33 0xFFDF Failed to connect to target
-34 0xFFDE Failed to register session with target (timeout)
-35 0xFFDD Failed forward open response timeout
-36 0xFFDC PCCC/Tag command response timeout
-37 0xFFDB No TCP/IP connection error
Common Response Errors
Error (Int) Error (Hex) Description
-40 0xFFD8 Invalid response length
-41 0xFFD7 CPF item count not correct
-42 0xFFD6 CPF address field error
-43 0xFFD5 CPF packet tag invalid
-44 0xFFD4 CPF bad command code
-45 0xFFD3 CPF status error reported
-46 0xFFD2 CPF incorrect connection ID value returned
-47 0xFFD1 Context field not matched
-48 0xFFD0 Incorrect session handle returned
-49 0xFFCF CPF not correct message number