ProSoft Technology PLX31-EIP-SIE - Manual (Page 176)

SIE Protocol PLX3x Series
User Manual Ethernet and Serial Gateways
Page 176 of 218 ProSoft Technology, Inc.
September 17, 2014
Parameter Value Description
Rack 0 to 999
Rack number of the S7-300, S7-400 or S7-1200 CPU.
Note: Rack number is not used for the S7-200 CPU.
Slot
0 to 12
Slot number of the S7-300, S7-400 or S7-1200 CPU.
Note: Slot number is not used for the S7-200 CPU.
TSAP TSAP of the S7-200 CPU. This can be found in the Siemens
STEP 7 MicroWIN software.
Note: TSAP is not used for the S7-300, S7-400 and S7-1200.
Func Type Read
Write
This parameter can either be Read or Write.
Data Type BOOL
BYTE
DINT
REAL
INT
TIME
COUNT
This parameter can be BOOL, BYTE, DINT, REAL, INT, TIME,
or COUNT.
Address
Type INPUT
OUTPUT
FLAG
TIMER
COUNTER
DB
This parameter can be INPUT, OUTPUT,FLAG, TIMER,
COUNTER or DB (Data Block).
DB Number 0 to 32767
Specifies the Data Block number to be used with the command.
Note: DB Number is only used when the Address Type is set to
DB.
Address Address of the data in the Siemens device. For Read or Write
operations using the INT, DINT, REAL or BYTE Data Types, the
address is a byte address.
For Read or Write operations using the BOOL Data Type, the
address is a bit address. Please see below for notes on
addressing.