ProSoft Technology PLX31-EIP-SIE - Manual (Page 74)

EIP Protocol PLX3x Series
User Manual Ethernet and Serial Gateways
Page 74 of 218 ProSoft Technology, Inc.
September 17, 2014
Remote STS Error Codes
Code (Int) Code (Hex) Description
0 0x0000 Success, no error
4096 0x1000 Illegal command or format
8192 0x2000 Host has a problem and will not communicate
12288 0x3000 Remote node host is missing, disconnected or shut down
16384 0x4000 Host could not complete function due to hardware fault
20480 0x5000 Addressing problem or memory protect rungs
24576 0x6000 Function not allowed due to command protection selection
26872 0x7000 Processor is in Program mode
-32768 0x8000 Compatibility mode file missing or communication zone problem
-28672 0x9000 Remote node cannot buffer command
-24576 0xA000 Wait ACK (1775-KA buffer full)
-20480 0xB000 Remote node problem due to download
-16384 0xC000 Wait ACK (1775-KA buffer full)
-12288 0xD000 Not used
-8192 0xE000 Not used
0xF0nn Error code in the EXT STS byte (nn contains EXT error code)
Errors When EXT STS Is Present
Code (Int) Code (Hex) Description
-4096 0xF000 Not used
-4095 0xF001 A field has an illegal value
-4094 0xF002 Less levels specified in address than minimum for any address
-4093 0xF003 More levels specified in address than system supports
-4092 0xF004 Symbol not found
-4091 0xF005 Symbol is of improper format
-4090 0xF006 Address does not point to something usable
-4089 0xF007 File is wrong size
-4088 0xF008 Cannot complete request
-4087 0xF009 Data or file is too large
-4086 0xF00A Transaction size plus word address is too large
-4085 0xF00B Access denied, improper privilege
-4084 0xF00C Condition cannot be generated - resource is not available
-4083 0xF00D Condition already exists - resource is already available
-4082 0xF00E Command cannot be executed
-4081 0xF00F Histogram overflow
-4080 0xF010 No access
-4079 0xF011 Illegal data type
-4078 0xF012 Invalid parameter or invalid data
-4077 0xF013 Address reference exists to deleted area
-4076 0xF014 Command execution failure for unknown reason
-4075 0xF015 Data conversion error
-4074 0xF016 Scanner not able to communicate with 1771 rack adapter
-4073 0xF017 Type mismatch
-4072 0xF018 1171 Gateway response was not valid
-4071 0xF019 Duplicate label