ProSoft Technology MVI69-101S - Manual (Page 64)

MVI69-101S ♦ CompactLogix or MicroLogix Platform Diagnostics and Troubleshooting
IEC 60870-5-101 Slave Communication Module
Page 64 of 149 ProSoft Technology, Inc.
March 16, 2009
Viewing IEC 60870 Database Configuration
Press [@] to view the database size configuration information.
Exiting the Program
Caution: Some of the commands available to you from this menu are designed for advanced
debugging and system testing only, and can cause the module to stop communicating with the
processor or with other devices, resulting in potential data loss or other failures. Only use these
commands if you are specifically directed to do so by ProSoft Technology Technical Support staff.
Some of these command keys are not listed on the menu, but are active nevertheless. Please be
careful when pressing keys so that you do not accidentally execute an unwanted command.
Press [Esc] to restart the module and force all drivers to be loaded. The module
will use the configuration stored in the module's Flash ROM to configure the
module.
4.1.4 Database View Menu
Press [D] from the Main Menu to open the Database View menu. Use this menu
command to view the current contents of the module's database. Press [?] to
view a list of commands available on this menu.