ProSoft Technology MVI69-101S - Manual (Page 27)

Configuring the MVI69-101S Module MVI69-101S ♦ CompactLogix or MicroLogix Platform
IEC 60870-5-101 Slave Communication Module
ProSoft Technology, Inc. Page 27 of 149
March 16, 2009
2.2.1 Module Name
0 to 80 characters
This parameter assigns a name to the module that can be viewed using the
configuration/debug port. Use this parameter to identify the module and the
configuration file.
2.2.2 Read Register Start
Range 0 to 3999
This parameter specifies the starting register in the module where data will be
transferred from the module to the processor. Valid range for this parameter is 0
to 3999.
2.2.3 Read Register Count
0 to 4000
The Read Register Count parameter defines the size of the module's input
database, up to a maximum value of 4000 words.
2.2.4 Write Register Start
0 to 3999
This parameter specifies the starting register in the module where the data will be
transferred from the processor to the module.
2.2.5 Read Register Count
0 to 4000
The Read Register Count parameter defines the size of the module's input
database, up to a maximum value of 4000 words.
2.2.6 Failure Flag Count
0 through 65535
This parameter specifies the number of successive transfer errors that must
occur before the communication ports are shut down. If the parameter is set to 0,
the communication ports will continue to operate under all conditions. If the value
is set larger than 0 (1 to 65535), communications will cease if the specified
number of failures occur.
2.2.7 Error Offset
0 to 8899, -1 to disable