ProSoft Technology MVI69-101S - Manual (Page 44)

MVI69-101S ♦ CompactLogix or MicroLogix Platform Configuring the MVI69-101S Module
IEC 60870-5-101 Slave Communication Module
Page 44 of 149 ProSoft Technology, Inc.
March 16, 2009
2 Open the Project menu, and then choose Module / Download. The program
will scan your PC for a valid com port (this may take a few seconds). When
PCB has found a valid com port, the following dialog box will open.
3 Choose the com port to use from the dropdown list, and then click the
Download button.
The module will perform a platform check to read and load its new settings.
When the platform check is complete, the status bar in ProSoft Configuration
Builder will be updated with the message "Module Running".