PLANET WGSW-28040P - Manual (Page 54)

User’s Manual of WGSW-28040 / 28040P / 28040P4
54
The page includes the following fields:
Object Description
• Status
Display the current local log state
• Target
Display the current local log target
• Severity
Display the current local log severity
• Action Indicates the local log mode operation. Possible modes are:
Enabled: Enable local log mode operation.
When enable local log mode operation, the log and messages will be
recorded in the switch.
Disabled: Disable local log mode operation.
4.2.7.2 Remote Syslog
Configure remote syslog on this page. The Remote Syslog page allows you to configure the logging of messages that are sent
to syslog servers or other management stations. You can also limit the event messages sent to only those messages below a
specified level.
The Remote Syslog screen in Figure 4-2-14 & Figure 4-2-15 appears.
Figure 4-2-14 Remote Log Target page screenshot