Ingress & egress bandwidth control, 25 spanning tree command, Force version – PLANET WGSW-28040P User Manual
Page 289
User’s Manual of WGSW-28040 / 28040P / 28040P4
289
Syntax:
bandwidth-control port
Parameters:
Port_list : Port list or 'all'
Ingress : Port effective ingress rate
egress : Port effective egress rate
rate : Rate (unit: Kbps), must be a multiple of 16 (0~1048544)
Example:
To set port bandwidth control configuration:
WGSW-28040(config)# bandwidth-control port 1 ingress 16
Ingress & Egress Bandwidth Control
Description:
Set ingress or egress bandwidth control configuration
Syntax:
bandwidth-control
Parameters:
Ingress : Port effective ingress rate
egress : Port effective egress rate
include :Include preamble and IFG
exclude :Exclude preamble and IFG
Example:
To set ingress bandwidth control configuration:
WGSW-28040(config)# bandwidth-control ingress include
6.3.25 Spanning Tree Command
Force Version
Description:
Sets the force-protocol-version parameter
Syntax:
spanning-tree force-version
Parameters:
stp-compatible :Spanning-tree protocol compatible
rstp-operation :Rapid spanning-tree protocol (802.1w)