PLANET WGSW-28040P - Manual (Page 212)

User’s Manual of WGSW-28040 / 28040P / 28040P4
212
The page includes the following fields:
Object Description
• System PoE Admin
Mode
Allows user enable or disable PoE function. It will causes all of PoE ports supply
or not supply power.
• Power Limit Mode
There are five modes for configuring how the ports/PDs may reserve power and
when to shut down ports.
Consumption mode
The default PoE management mode is “Consumption mode”.
• PoE Temperature Unit
1
Display the current operating temperature of PoE chip unit 1.
The unit 1 is in charge of PoE Port-1~Port-12
• PoE Temperature Unit
2
Display the current operating temperature of PoE chip unit 2.
The unit 1 is in charge of PoE Port-13~Port-24
• Power Allocation Show the total watts usage of PoE Switch.
•
Port This is the logical port number for this row.
• PoE Function There are two modes for PoE mode.
Enable: enable PoE function..
Disable: disable PoE function.
•
Device Class Display the class of the PD attached to the port, as established by the
classification process.
Class 0 is the default for PDs. The PD is classified based on power. The
classification of the PD is the maximum power that the PD will draw across all
input voltages and operational modes. A PD shall return Class 0 to 3 in
accordance with the maximum power draw as specified by Table 4-13-1 .
•
Current [mA] Shows how much ampere the PD currently is using.
•
Consumption [W] Shows how much power the PD currently is using.
Buttons
: Click to save changes.