PLANET WGSW-28040P - Manual (Page 19)

User’s Manual of WGSW-28040 / 28040P / 28040P4
19
− Private VLAN Edge (PVE / Port Isolation)
 Supports Spanning Tree Protocol
− STP, IEEE 802.1D (Spanning Tree Protocol)
− RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
− MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
 Supports Link Aggregation
− IEEE 802.3ad Link Aggregation Control Protocol (LACP)
− Cisco ether-channel (Static Trunk)
− Maximum 8 trunk groups, up to 8 ports per trunk group
− Up to 16Gbps bandwidth (Duplex Mode)
 Provide Port Mirror (many-to-1)
 Port Mirroring to monitor the incoming or outgoing traffic on a particular port
 Quality of Service
 Ingress / Egress Rate Limit per port bandwidth control
 8 priority queues on all switch ports
 Traffic classification:
- Port-Based priority
- IEEE 802.1p CoS
- IP DSCP
 Strict priority and Weighted Round Robin (WRR) CoS policies
 DSCP remarking
 Multicast
 Supports IGMP Snooping v1, v2 and v3
 Querier mode support
 IGMP Snooping v2 fast leave
 Unknown Multicast drop
 Security
 Storm Control support
− Broadcast / Multicast / Unknown-Unicast / Unknown-Multicast
 Authentication
− IEEE 802.1X Port-Based network access authentication
− Built-in RADIUS client to co-operate with the RADIUS servers
 Access Control List
− IP-Based ACL
− MAC-Based ACL
 MAC Security
− Static MAC