PLANET WGSW-28040P - Manual (Page 20)

User’s Manual of WGSW-28040 / 28040P / 28040P4
20
− Source / Destination MAC Filtering
− Port Security for Source MAC address entries filtering
 Management
 Switch Management Interfaces
- Console / Telnet Command Line Interface
- IPv4 and IPv6 Web switch management
- SNMP v1, v2c switch management
- SSH / SSL secure access
 Four RMON groups (history, statistics, alarms, and events)
 SNMP trap for interface Link Up and Link Down notification
 SNTP (Simple Network Time Protocol)
 Built-in Trivial File Transfer Protocol (TFTP) client
 BOOTP and DHCP for IP address assignment
 Firmware upload/download via HTTP / TFTP
 Event message logging to remote Syslog server
 Reset button for system reboot or reset to factory default
 Power over Ethernet (WGSW-28040P / WGSW-28040P4 Only)
■ Complies with IEEE 802.3af Power over Ethernet End-Span PSE
■ Up to 24 ports for IEEE 802.3af / at devices powered
■ Support PoE Power up to 15.4 watts for each PoE ports
■ Auto detect powered device (PD)
■ Circuit protection prevent power interference between ports
■ Remote power feeding up to 100m
■ PoE Management
■ Per port PoE function enable/disable