PLANET WGSW-28040P - Manual (Page 18)

User’s Manual of WGSW-28040 / 28040P / 28040P4
18
1.3 How to Use This Manual
This User Manual is structured as follows:
Section 2 , INSTALLATION
The section explains the functions of the Switch and how to physically install the Managed Switch.
Section 3 , SWITCH MANAGEMENT
The section contains the information about the software function of the Managed Switch.
Section 4 , WEB CONFIGURATION
The section explains how to manage the Managed Switch by Web interface.
Section 5 , COMMAND LINE INTERFACE
The section describes how to use the Command Line interface (CLI).
Section 6 , CLI CONFIGURATION
The section explains how to manage the Managed Switch by Command Line interface.
Section 7, SWITCH OPERATION
The chapter explains how to does the switch operation of the Managed Switch.
Section 8 , TROUBSHOOTING
The chapter explains how to trouble shooting of the Managed Switch.
Appendix A
The section contains cable information of the Managed Switch.
1.4 Product Features
 Physical Port
WGSW-28040
 28-Port 10/100/1000Base-T Gigabit RJ-45 copper
 4 100/1000Base-X mini-GBIC/SFP slots, shared with Port-25 to Port-28
 RS-232 DB9 console interface for Switch basic management and setup
WGSW-28040P / WGSW-28040P4
 28-Port 10/100/1000Base-T Gigabit RJ-45 copper with 24-Port IEEE 802.3af PoE Injector
 4 100/1000Base-X mini-GBIC/SFP slots, shared with Port-25 to Port-28
 RS-232 DB9 console interface for Switch basic management and setup
 Layer 2 Features
 Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
 High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
 Supports VLAN
− IEEE 802.1Q Tagged VLAN
− Up to 256 VLANs groups, out of 4094 VLAN IDs
− Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)