Snmp host, 23 storm control command, Storm control – PLANET WGSW-28040P User Manual
Page 288: 24 bandwidth control command, Port bandwidth control
User’s Manual of WGSW-28040 / 28040P / 28040P4
288
SNMP Host
Description:
Set trap receiver IP address
Syntax:
snmp host
Parameters:
A.B.C.D : IP Address format is A.B.C.D where (A/B/C/D = 0 ~ 254)
name : Community name (length 1~16)
Example:
To set trap receiver IP address:
WGSW-28040(config)# snmp host 192.168.0.99 public
6.3.23 Storm Control Command
Storm Control
Description:
Set storm control configuration
Syntax:
storm-control port
Parameters:
Port_list : Port list or 'all'
broadcast :Broadcast storm control
multicast :Multicast storm control
unknown-unicast :Unknown-unicast storm control
unknown-multicast :Unknown-multicast storm control
Example:
To set storm control configuration:
WGSW-28040(config)# storm-control port 1 unknown-multicast 100
6.3.24 Bandwidth Control Command
Port Bandwidth Control
Description:
Set port bandwidth control configuration