PLANET WGSW-28040P - Manual (Page 139)

User’s Manual of WGSW-28040 / 28040P / 28040P4
139
4.7.2 IGMP Snooping Setting
This page provides IGMP Snooping related configuration.
Most of the settings are global, whereas the Router Port configuration is related to the currently selected stack unit, as reflected
by the page header. The IGMP Snooping Setting screen in Figure 4-7-5 & Figure 4-7-6 appears.
Figure 4-7-5 IGMP Global Setting page screenshot
The page includes the following fields:
Object Description
• IGMP Snooping
Enable or disable the IGMP snooping. The default value is "Disabled".
• IGMP Snooping Version
Sets the IGMP Snooping operation version. Possible versions are:
v2: Set IGMP Snooping supported IGMP version 2.
v3-basic: Set IGMP Snooping supported IGMP version 3.
• Fastleave
Enable or disable the fastleave. The default value is "Disabled".
•
Unknow Multicast Action Drop or flood unknown multicast traffic.
•
Query Interval Sets the frequency at which the switch sends IGMP host-query messages.
Range: 60-600 seconds;
Default: 125
• Response Time
Sets the time between receiving an IGMP Report for an IP multicast address on a
port before the switch sends an IGMP Query out of that port and removes the
entry from its list.
Range: 10-25 seconds;