PLANET WGSW-28040P - Manual (Page 48)

User’s Manual of WGSW-28040 / 28040P / 28040P4
48
once. It also used a following legally IPv4 address. For example, '::192.1.2.34'.
• DHCPv6 Client
To enable this Managed Switch to accept a configuration from a Dynamic Host
Configuration Protocol version 6 (DHCPv6) server. By default, the Managed
Switch does not perform DHCPv6 client actions. DHCPv6 clients request the
delegation of long-lived prefixes that they can push to individual local hosts.
Buttons
: Click to apply changes.
Current IPv6 Information
Figure 4-2-6 IPv6 Information page screenshot
The page includes the following fields:
Object Description
• Auto Configuration
Display the current auto configuration state.
• IPv6 Address Display the current IPv6 address
• IPv6 Gateway
Display the current gateway
• DHCPv6 Client
Displat the current DHCPv6 client status.
• DHCPv6 DUID Displays the DUID information of the DHCPv6 client.
This information will be diplayed only after the DHCPv6 clisnet be enabled.
• DHCPv6 IP Address
Displays the DHCPv6 IP Address of the DHCPv6 client.
This information will be diplayed only after the DHCPv6 clisnet be enabled.
DHCP Unique Identifier (DUID)—Each DHCPv6 component has a DUID (DHCPv6 Unique Identifier)
which is used to identify the device when exchanging DHCPv6 messages.