PLANET WGSW-28040P - Manual (Page 26)

User’s Manual of WGSW-28040 / 28040P / 28040P4
26
■ 10/100/1000Base-T interfaces
LED Color Function
LNK/ACT Green
Lights: To indicate the link through that port is successfully established.
Blink: To indicate that the switch is actively sending or receiving data over that port.
PoE In-Use Orange
Lights: To indicate the port is providing 48VDC in-line power.
Off: To indicate the connected device is not a PoE Powered Device (PD)
■ 1000Base-SX/LX SFP interfaces (shared with Port-25 to Port-28)
LED Color Function
LNK/ACT Green
Lights: To indicate the link through that port is successfully established.
Blink: To indicate that the switch is actively sending or receiving data over that port.
1000 Green
Lights: indicate that the port is operating at 1000Mbps.
Off: If LNK/ACT LED light-> indicate that the port is operating at 100Mbps
If LNK/ACT LED Off -> indicate that the port is link down
■ Alert
LED Color Function
PoE PWR Green Lights to indicate that the power supply failure
FAN1 Green Lights to indicate that the FAN1 failure
FAN2 Green Lights to indicate that the FAN2 failure
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figure 2-6, Figure 2-7 & Figure 2-8 shows the rear panel of these Managed Switches
WGSW-28040 Rear Panel
Figure 2-6 Rear panel of WGSW-28040
WGSW-28040P Rear Panel
Figure 2-7 Rear panel of WGSW-28040P