Avago Technologies Syncro CS 9286-8e - Manual (Page 67)

Avago Technologies
- 67 -
Syncro CS 9286-8e Solution User Guide
November 2014 Chapter 4: System Administration
Updating the MegaRAID Driver
4.4.2 Updating the MegaRAID Driver in Windows Server 2012
As a recommended best practice, always back up system data before updating the driver, and then perform a planned
failover. These steps are recommended because a driver update requires a system reboot.
1. Run Server Manager and select Local Server on the left panel.
2. Click the Tasks selection list on the right-hand side of the window, as shown in the following figure.
Figure 48 Updating the Driver Software
3. Select Computer Management, then click Device Manager.
4. Click Storage to expose the Syncro CS controller.
5. Right-click the Syncro CS controller and select Update Driver Software, as shown in the following figure, to start
the Driver Update wizard.
6. Follow the instructions in the wizard.