Avago Technologies Syncro CS 9286-8e - Manual (Page 19)

Avago Technologies
- 19 -
Syncro CS 9286-8e Solution User Guide
November 2014 Chapter 3: Creating the Cluster
Creating Virtual Drives on the Controller Nodes
Figure 8 WebBIOS Main Page
The first Configuration Wizard window appears.
4. Select Add Configuration and click Next.
5. On the next wizard screen, select Manual Configuration and click Next.
The Drive Group Definition window appears.
6. In the Drives panel on the left, select the first drive, then hold down the Ctrl key and select more drives for the
array, as shown in the following figure.
Figure 9 Selecting Drives
7. Click Add To Array, click ACCEPT, and click Next.