2 ha-das terminology, 3 syncro cs 9286-8e solution features – Avago Technologies Syncro CS 9286-8e User Manual
Page 6

Avago Technologies
- 6 -
Syncro CS 9286-8e Solution User Guide
November 2014
Chapter 1: Introduction
HA-DAS Terminology
1.2
HA-DAS Terminology
This section defines some additional important HA-DAS terms.
Cache Mirror: A cache coherency term that describes the duplication of write-back cached data across
two controllers.
Exclusive Access: A host access policy in which a VD is only exposed to, and accessed by, a single specified server.
Failover: The process in which the management of drive groups and VDs transitions from one controller to the
peer controller to maintain data access and availability.
HA Domain: A type of storage domain that consists of a set of HA controllers, cables, shared disk resources, and
storage media.
Peer Controller: A relative term to describe the HA controller in the HA domain that acts as the failover controller.
Server/Controller Node: A processing entity composed of a single host processor unit or multiple host processor
units that is characterized by having a single instance of a host operating system.
Server Storage Cluster: An HA storage topology in which a common pool of storage devices is shared by two
computer nodes through dedicated Syncro CS 9286-8e controllers.
Shared Access: A host access policy in which a VD is exposed to, and can be accessed by, all servers in the
HA domain.
Virtual Drive (VD): A storage unit created by a RAID controller from one or more physical drives. Although a
virtual drive can consist of multiple drives, it is seen by the operating system as a single drive. Depending on the
RAID level used, the virtual drive might retain redundant data in case of a drive failure.
1.3
Syncro CS 9286-8e Solution Features
The Syncro CS 9286-8e solution supports the following HA features.
Server storage cluster topology, enabled by the following supported operating systems:
—
Microsoft® Windows Server® 2008 R2
—
Microsoft Windows Server 2012
—
Red Hat® Enterprise Linux® 6.3
—
Red Hat Enterprise Linux 6.4
—
SuSE® Linux Enterprise Server 11 SP3
—
SuSE Linux Enterprise Server 11 SP2
Clustering/HA services support:
—
Microsoft failover clustering
—
Red Hat High Availability Add-on
—
SuSE High Availability Extensions
Dual-active HA with shared storage
Controller-to-controller intercommunication over SAS
Write-back cache coherency
CacheCade® 1.0 (Read)
Shared and exclusive VD I/O access policies
Operating system boot from the controller (exclusive access)
Controller hardware and property mismatch detection, handling, and reporting
Global hot spare support for all volumes in the HA domain
Planned and unplanned failover modes
CacheVault® provides cache cached data protection in case of host power loss or server failure