Avago Technologies Syncro CS 9286-8e - Manual (Page 65)

Avago Technologies
- 65 -
Syncro CS 9286-8e Solution User Guide
November 2014 Chapter 4: System Administration
Updating the MegaRAID Driver
4.4.1 Updating the MegaRAID Driver in Windows Server 2008 R2
As a recommended best practice, always back up system data before updating the driver, and then perform a planned
failover. These steps are recommended because a driver update requires a system reboot.
1. Right-click on Computer and select Properties.
2. Click Change Settings, as shown in the following figure.
Figure 46 Windows Server 2008 R2 System Properties
3. Select the Hardware tab and click Device Manager.
4. Click Storage to expose the Syncro CS 9286-8e controller.
5. Right-click the Syncro CS 9286-8e controller and select Update Driver Software to start the Driver Update
wizard, as shown in the following figure.