Avago Technologies Syncro CS 9286-8e - Manual (Page 59)

Avago Technologies
- 59 -
Syncro CS 9286-8e Solution User Guide
November 2014 Chapter 4: System Administration
Understanding Failover Operations
Figure 41 After Failover from Server A to Server B
After failover, the cluster status is as follows, in terms of managing the drive group and the VDs:
 All shared VDs in A-DG0 have failed over and are now managed by Server B.
 VD3 in B-DG0 is still managed by Server B.
 The CacheCade VD (CC-VD) in A-CC now appears as a foreign VD on Server B but does not service any VDs in
A-DG0 or B-DG0.
After failover, the operating system perspective is as follows:
 The operating system on Server B manages all shared VDs and any exclusive Server B VDs.
After failover, the operating system perspective of I/O transactions is as follows:
 Failover Cluster Manager has moved the I/O transactions for VD2 on A-DG0 to Server B.
 Server B continues to run I/O transactions on B-DG0:VD3.
 I/O transactions that rely on the exclusive A-DG0:VD1 on Server A fail because exclusive volumes do not move
with a failover
NOTE When Server A returns, the management and I/O paths of the
pre-failover configurations are automatically restored.
The following sections provide more detailed information about planned failover and unplanned failover.